8
Subject to change without notice | 83031300dUK | ait-deutschland GmbH
5.3 Transport
Notes on safe transport
The unit is heavy (
“Technical data / scope of sup-
ply”, page 20). There is a risk of injuries or damage
to property if the unit falls or overturns.
There is a risk of cutting your hands on sharp edges
of the unit.
►
Wear cut-resistant protective gloves.
The hydraulic connections are not designed for me-
chanical loads.
►
Do not lift or transport the unit by the hydraulic
connections.
►
Transport the unit to the place of installation pack-
aged.
Retractable fan
In order to allow the unit to be easily transported
through tight cellar spaces and narrow doorways and/
or hallways, the fan retracts approx. 10 cm into the
body of the unit:
1 Fan in delivery condition
2 Fan pushed into the unit
IMPORTANT
Only retract the fan into the body of the unit for
transport purposes and extend it to its original posi-
tions following transport.
1. Unpack the unit.
“Unpacking”, page 11
5 Scope of supply, storage,
transport and installation
IMPORTANT
Damage to the housing and the unit components
due to heavy objects.
►
Do not place any objects on the unit which are
heavier than 30 kg.
IMPORTANT
Do not tilt the unit more than a maximum
of 45° (in any direction).
5.1 Scope of supply
●
heat pump
●
1 screen for control unit
●
4 base panels
The accompanying parts package contains:
●
1 outdoor temperature sensor
●
2 guide rods for insertable fan
●
1 control unit
●
1 holder for control unit
●
1 temporary cover for screen
●
10 countersunk screws M6x16 for base panels
●
2 hexagonal bolts M10x25
●
2 hexagonal bolts M12x40 with nuts M12
●
documents (manuals, ERP data and label)
●
nameplate stickers
►
Check delivery immediately after receipt for exter-
nally visible damage and completeness.
►
Notify supplier of any defects immediately.
5.2 Storage
►
Do not unpack the unit until directly before instal-
lation.
►
Store unit protected against
●
Moisture/damp
●
Frost
●
Dust and dirt
