15
Subject to change without notice | 83031300dUK | ait-deutschland GmbH
15 Installation and removal of the
screen
15.1 Installing the screen
NOTE
The screen is provided at the time of delivery
so that the control unit may be inserted in the
upper recesses of the facade facade of the
operating side of the unit.
If the control unit has been inserted in the
lower recesses of the facade, you must first
remove the screen’s temporary cover and
then reinsert it above the logo.
Screen at time of delivery:
1 recess for control unit
2 logo
3 temporary cover
1. First, insert the screen
below
, in the provided
slots on the facade.
2.
Beginning first on one side and moving upwards,
lock t
he
screen’s snap-in lugs in place
in the
slots
provided on the facade.
3. Next,
on the opposite side, moving upwards.
lock the screen’s snap-in lugs in place in the slots
provided on the facade.
4. Finally, press the screen’s upper snap-in lugs into
the slots provided on the facade.
15.2 Removing the screen
In order to remove the screen, the snap-in lugs must
first be loosened by pressing one side
com-
pletely
toward the middle of the screen
.
Thereafter, remove the snap-in lugs from the opposite
side.
