2.4.3 Meter Setting
2.4.3.1 ADL3000
2.4.3.2 ACR10R
Step 1
The initial interface of the meter
(normal working interface) is as shown
below:
Step 2
Click the “SET” button to enter the
password interface:
Step 1
This is the initial interface of the
meter, click the "Set" button;
Step 2
Click the "SETUP" button;
Step 3
Click the "Enter" button to enter
the following interface and press the up
and down arrow keys to enter the
password 0001;
Step 4
Click the "Enter" button and the
password input is completed.
Step 5
Click the “Enter” button again to
enter the address interface:
Step 6
Click the “Enter” button to enter
the following interface, press the up and
down arrow keys to set the meter address,
the Grid meter (DC, AC and Hybrid system)
address is set to 001, and the PV meter (AC
and Hybrid system) address is set to 002.
Step 7
Click the "Enter" button and the
address setting is completed.
Step 8
Click the “SET” button to enter the
following interface:
Step 9
Click the “SET” button again to
enter the save interface:
Step 10
Click the “Enter” button to enter
the following interface, press the up and
down arrow keys, and set “no” to “YES” to
save the configuration.
Step 11
Click the "Enter" button and the
setting ends.
Step 3
On the password input interface,
the code is "0001", confirm to enter the
setting interface;
Step 4
In the setting interface, select
"Comm" option, enter the communication
setting interface;
INSTALLATION
INSTALLATION
29
30
