______________________________________________________________________
Alpha ESS Co., Ltd.
Page 29 of 31
Your Smart Energy
Routine Maintenance
while maintaining:
•
Related safety standards and specifications should be followed in operation and
maintenance.
•
Disconnect all the electrical connections so that the equipment would not be powered
on.
•
Wait at least 5 minutes after disconnection in case that the residual voltage of
capacitors down to safe voltage. Use a multimeter to ensure the equipment is completely
uncharged.
•
The equipment should be repaired by professional staff and it is strictly for-bidden for
maintenance staff to open equipment on their own.
•
Appropriate protective measures should be taken while maintaining, such as insulated
gloves, shoes, and anti-noise ear plugs.
•
Life is priceless. Make sure no one would get hurt first.
•
The batteries need to be charged to 30%~50%SOC rate when the whole sys-tem is
static (that is, the batteries has not been charged for two weeks or longer) for a long time,
in case of over discharge.
Please contact us in time if there are any conditions that could not be explained in the
manual.
