Page
6
Option 2
56-92 Zone System:
• Each card installed will have 6 ports
• On top of each port there is a label indicating connection:
S01-S_
is the port used for connecting emergency phones
TD(1-2)(3-4) with a dot under the D
is the port used for connecting Command Center phone(s)
TD(1-2)(3-4) with a dot under the T
is the port used for outside Telco line
• Plug the supplied RJ45 pigtail cables into the ports following the wiring chart and pin-out color scheme
below
• Refer to the top of the cards to see what type of port and number of extensions
• The same pin-out color scheme should be used for the primary card and for all additional cards. The
system uses T568-A for pin-out wiring.
• The first card installed will always be:
• Port 1: (S01-S04) Connection for 4 Emergency Phones
• Port 2: (S05-S08) Connection for 4 Emergency Phones
• Port 3: (S09-S12) Connection for 4 Emergency Phones
• Port 4: (S13-S16) Connection for 4 Emergency Phones
• Port 5: (D1-2) Connection for up to 2 Command Center Phones
• Port 6: (T1-2) Connection for up to 2 outside Telco Lines
Card 1 Example
pg. 6
S01-S04
S05-S08
S09-S12
2003
2004
COMMAND CENTER 1
SECONDARY COMMAND CENTER
OR BUTTON CONSOLE
2001
2002
PHONE 1
PHONE 2
PHONE 3
PHONE 4
Note: Do not use
the green and
brown pairs
S13-S16
D1-2
T1-2
2007
2008
2005
2006
PHONE 5
PHONE 6
PHONE 7
PHONE 8
2011
2012
2009
2010
PHONE 9
PHONE 10
PHONE 11
PHONE 12
2015
2016
2013
2014
PHONE 13
PHONE 14
PHONE 15
PHONE 16
TELCO LINE 1
TELCO LINE 2
