OWNER'S MANUAL OF SEEDING-DRILL AS1
Old Cod.Q00A00136
New Cod. MANT2010/00634 R.2
INSTALLATION
- 11
Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa
4.4.
ASSEMBLING THE SEEDER BAR
The operation should be carried out on a horizontal surface,
with the harrow in a stable position and the seed bar positioning
legs inserted.
Per il montaggio della barra di semina seguire le istruzioni riportate nel manual
dedicato
4.5.
ASSEMBLING THE SOWING WHEEL
When the seed-drill AS1 is delivered to the customer, the ground drive-wheel is not
assembled on the machine.
When the package is opened, the wheel is already pre-assembled in some of its
details, as shown in the picture
When opening the package make sure that on the gear box there is
one of the following stickers identifying the width of the seed-drill,
which must be the same as shown on the sticker. THE GROUND
DRIVE-WHEELS ARE NOT ALL THE SAME!
Here below the table listing the diameters of the wheels with their
corresponding ratios of the gear box for each seed-drill width
After the seeding bar has been mounted on the quick-hitch kit, the ground drive-wheel must be mounted:
In order to do this correctly, follow the instructions below
Seed-drill width
3m
3.5 m
4 m
mm
670
750
670
1,9:1
1,35:1
1,35:1