OWNER'S MANUAL OF SEEDING-DRILL AS1
Old Cod.Q00A00136
New Cod. MANT2010/00634 R.2
SAFETY REGULATIONS
- 7
Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa
3.5.
CIRCULATING ON ROADS
If necessary, the machine can be transported on the roads while hitched to the tractor. The operator must check, compare and
adapt the implement so that it fully complies with the Highway Code in force in the country of use. Bear in mind the following
recommendations:
1) Comply with the instructions in this manual when you hitch the machine to the tractor;
2) The machine must remain blocked and raised from the ground during transport.
3) You must take all possible precautions and comply with the pertinent laws in order to safeguard yourselves
and others.
4) Projecting parts and those beyond the width of the tractor must be fitted with the relative protections.
5) The entire implement must be equipped with its own lighting system complete with flashing lights and indicators.
6) Warning boards to indicate the projecting parts of the implement must be affixed where necessary.
7) The braking distance and steering capacity of the tractor are influenced by the weight of the machine hitched
to its power lift. When driving round bends, take great care and allow for the action of the centrifugal force that
shifts the machine’s center of gravity.
8) Comply with the load limits on the axles.
9) Bear in mind the limits imposed by the overhang and projection from the sides of the tractor
3.6.
ECOLOGY
Respect current user country laws regarding the use and elimination of products used for lubrication, maintenance and machine
cleaning. Carefully observe the indications given on the packaging of the products themselves.
Respect current norms even when scrapping the machine.
3.7.
SAFETY SIGNALS
The various adhesives on the machine are there to highlight the source of danger. Observe them carefully and follow the
indications for using the machine safely. The labels should be kept clean and be legible – if damaged they should be replaced.
figure
code
Indications
D02612
Before using the equipment it is obligatory to read the
user and maintenance manual and the advice on safety.
All instructions must also be observed during use
D02615
Indicates the need to switch off the tractor and remove
the ignition key during maintenance operations
D02627
Indicates the hooking point for loading the machine on
trucks and transporting it.
