manualshive.com logo in svg

ALP K2 DM-4000, Instructions Manual, Page: 20 / 36

Share
Download
ALP K2 DM-4000 Instructions Manual Download Page 20

- 20 -

Recalling saved measurement results

1.  Push the POWER BUTTON to turn on the power

2.  After 0 appears in the display, press the MODE 

BUTTON to set [AUTO] or [AUTO3]

In the [MANUAL] setting, saved results cannot be recalled.

3.  Press the SET/MEMORY BUTTON

The average value of saved measurement results is 
displayed.
The average indicates the average of, at most, the last three 
measurement results from the latest measurement result.
Measurement results (average) indicates the number of 
measurement results used for the average.

When there is only one saved measurement result, this 
measurement result is displayed.

Memory function

Measurement results measured using AUTO measurement and AUTO3 measurement are saved 
to memory automatically after measurement. Measurement results recorded using MANUAL 
measurement are not saved.
The memory can store up to 30 measurement results.
If the number of saved measurement results reaches 30, the oldest measurement result is deleted, and 
the latest measurement result is saved after the next measurement.
Furthermore, you can delete unnecessary measurement results from memory.

or

Systolic

Diastolic

Average

Pulse rate
Measurement results (average)

Summary of Contents for DM-4000





































Reviews:

No comments