manualshive.com logo in svg

ALP K2 DM-4000, Instructions Manual, Page: 14 / 36

Share
Download
ALP K2 DM-4000 Instructions Manual Download Page 14

- 14 -

If the preset pressure value was insufficient for 
the measurement, inflation is carried out again 
automatically.

For information about re-inflation, see page 3.

5.  Connect the cuff

Measure the patient’s arm circumference, and then use 
an appropriate cuff based on the table on the right.

Securely insert the air plug of the cuff into the air 
connector on the left side of the main unit.

6.  Apply the cuff to the patient’s arm.

Find a chair and a table so that the patient can be 
comfortably seated with patient’s back and arm 
supported. Legs should not be crossed and feet kept flat 
on the floor.

Measure the left arm during AUTO measurement. If 
the right arm is measured, it may not be possible to 
measure normally due to the attachment state of the cuff.

When applying the cuff, make sure that the ARTERY 
mark “

” aligns with the brachial artery and the 

INDEX mark “

” is within the OK line.

7.  Press the START/STOP BUTTON to start 

measurement

Measurement 

count

CUFF SIZE
REGULAR
LARGE

ARM CIRCUMFERENCE
22-32 cm
32-42 cm

2 to 3cm

AIR PLUG

Summary of Contents for DM-4000





































Reviews:

No comments