S.G. Elettronica S.r.l
- Via E. Ferrari , 28 - 30037 Scorzè (VE) Italy - Tel +39 041 5841973 Fax +39 041 5841979 - www.almot.it - [email protected]
5
4.5 MEMORIZATION OF A TX BY CONTROL UNIT CENTRALE 870N
4.7 RESET OF ALL THE TX BY CONTROL UNIT 870N
4.8 RESET TOTALE
4.6 DELETING A TX BY CONTROL UNIT 870N
1) When the control unit
has been supplied, press
and holdthe P1 switch for
3 seconds and release.
2) The control unit will
make a long sound.
4) Press IMMEDIATLY the
STOP switch of the TX to
memorize.
5) The motor will do TWO
short opposite move-
ments.
6)
PROGRAMMING ac-
complished
BEEEEEEP
1) When the control unit
has been supplied, press
and holdthe P1 switch for
3 seconds and release.
2) The control unit will
make a long sound.
4) Press IMMEDIATLY the
STOP switch of the TX to
delete.
5) The motor will do TWO
short opposite move-
ments.
6)
RESET accomplished
BEEEEEEP
1) When the control unit
has been supplied, press
and hold the P1 switch .
2) After many seconds,
The motor will do TWO
short opposite move-
ments.
3) Release the programming
P1 switch.
6)
RESET accomplished
1) Close the contact
between the
COM
input and the
PP
input of the control
unit 870N
2) Supply the control
unit.
3) After many se-
conds, The motor will
do
FOUR short oppo-
site consecutive mo-
vements.
4) OPEN the contact
between the
COM
input
and the
PP
input of the
control unit 870N
5) After many se-
conds, The motor will
do ONE further short
opposite movement.
6) After some se-
conds the motor
will do TWO further
short opposite mo-
vements.
