S.G. Elettronica S.r.l
- Via E. Ferrari , 28 - 30037 Scorzè (VE) Italy - Tel +39 041 5841973 Fax +39 041 5841979 - www.almot.it - [email protected]
4
4.3 REGULATION OF THE WIND BY TX (IF SET BY DIP SWITCH)
4.2 DELETING A TX BY TRANSMITTER
1) Press and hold the
PROGRAMMING
switch of a TX already
stored.
2) After some se-
conds the motor will
do TWO short oppo-
site movements.
3) Release the PRO-
GRAMMING switch of
the TX already stored.
4) Press IMMEDIATLY
the STOP switch of the
TX to store.
5) The motor will do
TWO short opposite
movements.
6)
RESET accompli-
shed.
1) Press and hold
the PROGRAM-
MING switch of a
TX already stored.
2) After some se-
conds the motor will
do TWO short oppo-
site movements.
3) After some seconds
the motor will do TWO
further short opposite
movements.
4) Release the PRO-
GRAMMING switch of
the TX altready stored.
5) If the CLIMB switch
is pressed, 15 km/h
will be set.
Choose
just one switch.
6) If the STOP
switch is pressed,
25 km/h will be set.
Choose just one
switch .
7) If you pree the
DESCENT switch, 35
km/h will be set.
Choose just one
switch.
8) Once you pressed the
wanted switch, the mo-
tor will do TWO short
opposite movements of
confirmation.
9)
REGULATION OF
THE WIND SPEED
ACCOMPLISHED.
4.4 INVERSION OF THE MOTOR MOVEMENT BY TX
1) Press and hold the
PROGRAMMING
switch of the TX al-
ready stored.
2) After a few seconds
the motor will do TWO
short opposite move-
ments. 1 BEEP
3) After a few seconds
the motor will do
TWO further short
opposite movements.
2 BEEP
4) After a few seconds
the motor will do TWO
further short opposite
movements. 3 BEEP
5) Release the PRO-
GRAMMING switch of
the TX altready stored.
6)
INVERSION OF
THE MOTION AC-
COMPLISHED.
