S.G. Elettronica S.r.l
- Via E. Ferrari , 28 - 30037 Scorzè (VE) Italy - Tel +39 041 5841973 Fax +39 041 5841979 - www.almot.it - [email protected]
5
6.0 PROGRAMMATION OF THE FIRST TX MASTER REMOTELY (NO TX IN THE MEMORY)
1) Power the control unit. 2) The buzzer of the
control unit will emit a
prolunged sound.
3)
Within seconds
push
the button
STOP
of the
transmitter to memorized.
4) The buzzer of the con-
trol unit will emit an inter-
mittent sound.
5)
POGRAMMING DONE.
1) After the control unit is
powered, push the
button
P1
for
3 seconds
and release
2) the buzzer of the
control unit will emit a
prolunged sound
3)
Within seconds
push
the button
STOP
of the
transmitter to memorized.
4) The buzzer of the con-
trol unit will emit an inter-
mittent sound.
5)
POGRAMMING (OR
RESET) DONE
6.1 MEMORIZATION OF A TX FROM A 893 CONTROL UNIT
BEEEEEEP
BEEEEEEP
BEP-BEP-BEP
BEP-BEP-BEP
6.3 TOTAL RESET
1) When the control unit is powered
push and keep pressed the button
P1, the buzzer will emit a long sound.
1)
Keep pressed
the button
P1
until
you hear the intermittent sound of
the buzzer.
Release
the button
P1
3)
TOTAL RESET DONE
BEP-BEP-BEP
BEEEEEEP
6.2 MEMORIZATION (OR RESET) OF A TX FROM A TRANSMITTER MASTER
1)
push and keep pres-
sed
the hidde button on
the back transmitter al-
ready memorized
2) the buzzer of the
control unit will emit a
prolunged sound
3)
Within seconds
push
the button
STOP
of the
transmitter to memorized.
4) The buzzer of the con-
trol unit will emit an inter-
mittent sound.
5)
POGRAMMING (OR
RESET) DONE
BEP-BEP-BEP
N.B.: this operation delated the transmitter it is already memorized, the buzzer confirmed with prolunged sound (point 4)
BEEEEEEP
