RC3-LOG & RC3P-LOG INSTRUCTION MANUAL
Page
15
SHAWALMEX-EUROPE BV
RC3-LOG & RC3P-LOG INSTRUCTION MANUAL SEPT 2018
2.
Faulty temperature controller.
2.
Refer to ALMEX NANODAC instruction manual.
3.
Faulty RTD temperature
sensor.
3.
Measure the resistance between pins 4-5 and 4-6 on the
platen electrical receptacle. Depending on the platen
temperature, the resistance should be between 100-170
Ohms.
7.5.
Controller will not maintain Set Point Temperature
FAULT
CORRECTION
1.
Controller not calibrated
properly.
1.
Follow calibration procedure.
2.
Faulty temperature controller.
2.
Refer to ALMEX NANODAC instruction manual.
Replace temperature controller
8.
Service
8.1.
Emergency Service
Contact:
Service Department
Telephone:
+31 652 667 301
Fax:
+31 842 202 967
Mail:
SHAW ALMEX EUROPE BV
PO BOX 16
9247 ZN, Ureterp
The Netherlands
E-mail:
8.2.
Return of Goods Authorization
The service department of Shaw-Almex Industries Limited MUST be contacted for the necessary authorization
and documentation prior to returning goods to the factory.
The service department may be reached at the above numbers.
8.3.
Guarantee
Your ALMEX vulcanizer is guaranteed against defective parts, material and workmanship for a period of 12
months from the date of purchase. For complete details, refer to the Warranty Card.
