Function ´Storage Activation´ in print cycle:
Store: Sleep:-
-
Switch on storing:
<
ON
>
Switch off storing:
<
OFF
>
-
Switch on function ´Sleep Mode´, see 8.6:
<
ON
>
Output format ´
´ measured values in list format:
OutputFormat:List
Output format ´
n
´ columns side by side:
OutputFormat:Columns
Output format ´
t
´ table with semicolon separation:
OutputFormat:Table
Output of date and time in Excel number format, see 10.8.
In the meas. menus the format abbreviations ´n´ or ´t´
and ´S´ (with storage activation) or ´U´ (without storage
activation) are displayed next to the print cycle:
PrintCycle: 00:15:00nS
7.3 Measuring Cycle and Storage Activation
Generally, the measuring cycle is used for data acquisition within a print cycle,
e.g. for the following applications:
1. Frequent data storage in measuring cycle, printing in print cycle only
2. Limit value monitoring and alarm value output in measuring cycle
3. Cyclic averaging (see manual 6.7.4)
Function ´MeasCycle´ (format hh:mm:ss s. 5.5):
MeasCycle: 00:00:30
Clear meas. cycle, terminate current scan:
<
CLR
>
Function ´Storage Activation´ in meas. cycle:
Store:
-
Switch on storing:
<
ON
>
Switch off storing:
<
OFF
>
-
7.4 Conversion Rate, Continuous Measuring Point Scan
If required, for measuring point scans the conversion rate can in function
´Conv.Rate´ be increased from 2.5 to 10M/sec (see manual 6.5, 6.5.4).
The continuous measuring point scan (previously introduced) can at this
point, be switched on or off by using the function ´CONT´, i.e. either the
selected measuring point will only be scanned, or all active measuring
channels will be continuously and successively scanned (see manual 6.5.1.3).
The following two functions can be used to activate the continuous storage and
the continuous output of measuring data at the conversion rate.
Function ´Conv.Rate´, cont. meas. point scan:
ConvRate: 10Cont:
Continuous storage:
Store: -
Switch on the continuous storage:
<
ON
>
Continuous output:
Output: -
Switch on the continuous output:
<
ON
>
At the conversion rate of 50 measuring operations per second, the
shorter evaluation times result in the following restrictions:
44
ALMEMO
®
5990-2
Times and Cycles
Summary of Contents for ALMEMO V5 5990-2
Page 76: ...76 ALMEMO 5990 2 Appendix...
Page 77: ...ALMEMO 5990 2 77...