Almaco Seed Spector LRX, Operator'S Manual

Page: 35 / 48

SEED SPECTOR LRX MANUAL
27
$Y
– DEVICE SCAN TIME
Syntax: $Y (D)(V)
Where:
(D) is the device (channel).
(V) is a desired scan time value.
This command sets the SCAN time for a specific channel. This is the time base
used by the SS LRX to read the A/D converter:
Response: Y (D) = [ current value > new value] <CR><LF>
$Z
– RESET RELAY
Syntax: $Z (N)
Where:
(N) is the relay number
This command resets or opens the specified relay.
NOTE: See $S Command for more information
Response: None