ALMAC BiBi 850 HE, Use And Maintenance Manual

Page: 53 / 157

52
3.3.3 Lifted load limiting device
The machine has a work platform, that when extended, is greater than 1 m² of surface, therefore, on the
cylinder are installed two pressure transducers that prevent the lifting of the platform from the recovery
position, in case of exceeding by more than 20% of the load.
If an overload condition is sensed at or above this height, further elevation is prevented.
All normal movement of the work platform is prevented.
Normal movement can only restart if the overload is removed.
In this situation the warning lights (n°4 shown below) is Flashing and an intermittent beep will be heard
until you remove the excess load.
WARNING:
- NEVER exceed the machine's established maximum capacity.
- THE OPERATOR IS PROHIBITED TO MOVE BETWEEN THE BASKET AND A
STRUCTURE OUTSIDE THE MACHINE, MACHINE STABILITY COULD BE JEOPARDISED.
PERSONNEL AND THE EQUIPMENT MUST ENTER AND EXIT THE CAGE ONLY WITH
THE SCISSOR IN STOWED POSITION AND BASKET RETRACTED.