ALMAC Athena 870-BL EVO, Translation Of Original Instructions

Page: 95 / 180

PAGE
95 ALMAC s.r.l.
If the inclination of the platform remains within ± 0.5° both laterally and
longitudinally, it is possible to lift the work platform.
Warning: manual levelling is less accurate than automatic levelling
4.2.5.3 Dynamic Levelling during travel
Note: dynamic levelling can be activated only with the platform completely
lowered.
Thanks to this system, the platform, while it is moving, will always remain
levelled and once the operating area has been reached, the machine will already
be in the condition to be lifted.
To activate this mode, it is necessary to turn selector 9 of the push-button panel
to the HARE position and selector 8 to the "DRIVE MODALITY" or ED-S position.
Warning: If selector 8 is positioned on DC-S, the function is not active.
4.2.5.4 Proactive Levelling
Note: the Proactive Levelling is active only up to the maximum travel height
allowed, which on this model is 4.5 mt platform floor (6.5 mt work).
This system allows to correct the levelling of the machine when it is at a height,
if after travelling on not perfectly flat ground, the platform is no longer aligned
with the ground itself.
Since the machine can also be levelled with the platform not in the transport
position, another safety ring, both electric and hydraulic, has been added.
The levelling speeds are significantly reduced compared to those with the
machine in the transport position.
This is wanted both to make the manoeuvre comfortable for the operators and
to minimise the effects due to inertia.
This additional system is not required by standard UNI EN 280:2015