28
With a long press on the S-Button (>2 seconds) you leave the setting menu and return to the main operating
menu.
7. Technical data
FMT-W30C5 FMT-W30K1 FMT-W40C5
FMT-W40K1
Measuring Range
Range in Newton (N)
0...500 N
0…1000 N
0…500 N
0…1000 N
Alternative units
N | kg | lb
Wire Diameter
Slot width terminal adapter
0,5 | 0,8 | 1,0 | 1,3 | 1,5 | 2,0 | 2,5 | 3,0 | 3,5 | 4,0 | 5,0 | 6,0 mm
Clamp opening
0,1 ... 6,0 mm (continously variable)
Dia. Range IEC 60352-2
0,05 ... 4 mm²
(AWG10...30)
0,05 ... 6 mm²
(AWG8...30)
0,05 ... 4 mm²
(AWG10...30)
0,05 ... 6 mm²
(AWG8...30)
Dia. Range SAE AS7928 II
AWG 14 ... 28
AWG 10 ... 28
AWG 14 ... 28
AWG 10 ... 28
Resolution
0,5N (0,05kg / 0,1lb)
1 N (0,1kg / 0,2lb)
0,5 N (0,05kg / 0,1lb) )*
0,5 N (0,05kg / 0,1lb)
1 N (0,1kg / 0,2lb)
0,5 N (0,05kg / 0,1lb) )*
Accuracy
@ 23°C (F.S.)
+/- 0,5% (+/- 1 increment of resolution)
Tk (absolute)
selfadjusting at start
Tk (relativ)e
+/- 0,02% (°K)
Betriebsarten
Standard
displays real time value in N | kg | lb
PEAK
displays peak value in N | kg | lb (selectable)
Pulls until break
Yes
Pull test with dwell time
Yes )*
Pull-Release (until force limit)
Yes )*
Pull Speed
Speed
10 | 25 | 50 | 100 | 150 | 200 mm/min )*
Accuracy
+/- 5%
Overload
max. admissible
200 % (F.S.) | alarm at 120% (F.S.)
Display
Type
LCD, 5-digit, 12mm high
Update (Standard)
1000 msec | 500 msec | 333 msec | 200 msec |100 msec | 50 msec (selectable)
Update (Peak)
ca. 1 msec
Memory
Manual memory
Capacity of 1000 test cycles | Statistics with display of average, maximum,
minimum and standard deviation
Auto memory
Yes )*
Power supply
Type
Solar cell
With USB connected via PC
24 VDC | 3A universal power supply
Standby consumption: 42mA
Average consumption (drive active): 0,8A
Interface
USB 2.0
Optional software FMT-W_Connect
Temperature range
Operation
5°…40° C
5°... 30° C
Storage
-20°... 60° C (rF < 80%)
Protection code
IP 40
Weight
app. 14 kg
Dimensions
LxWxH (without lever)
350x160x75 mm
320 x 160 x 115 mm
Housing material
Main plate surface hardened steel, Grip and
fixtures stainless steel, cover anodized aluminum
Main plate surface hardened steel, Grip and fixtures
stainless steel, cover anodized aluminum and
polystyrene.
)* function or setting requires software FMT-W_Connect
8. Maintenance and calibration
This instrument is maintenance-free under proper use. Torn parts of wire must not fall into the spaces
around the connection adapter; should this occur, blow them off or remove them using the vacuum cleaner.
Force gauges should be inspected and re-calibrated on a regular base, at least once a year. Our calibration
services comprise the inspection, and calibration according ISO 9001:2008 approved procedures and a
readjusting of the load cell if necessary. (E-mail address:
).
8.1 5-Years extended warranty
We grant for all Alluris force gauges a 5 years extended warranty period starting with the date of purchase, subject to the registration of the
device before it is taken into operation and the service and calibration at regular intervals in our calibration laboratory. Consumption material,
normal wear and tear as well as damages caused by improper use are excluded from this warranty. Apart from that the warranty clause of our
general conditions of sales and delivery are valid.
