manualshive.com logo in svg

AlluGuard AG55, Operating, Maintenance, Servicing And Installation Manual

Share
Download
AlluGuard AG55 Operating, Maintenance, Servicing And Installation Manual Download Page 25

24

25

DECLARATION OF INCORPORATION

Gary Brooks
Managing Director

We, 

AlluGuard Limited

Of 

Rotherham Road, Parkgate Rotherham S62 6FP

Declare that: 

Power Operated Roller Garage Door

Models: 

AlluGuard 77 and AlluGuard 55

Manufactured by:  

AlluGuard Limited

 

Are in conformity with the essential Health and Safety requirements of the Machinery Directive 2006/42/EC. 
And conform with the Low Voltage Directive 2006/95/EC, and the Electromagnetic Compatibility Directive 
2004/108/EC.

A technical file of documentation has been compiled in accordance with Annex VII (Part 7 of Schedule 2), part 
B. AlluGuard undertakes to transmit, in response to a reasoned request by the national authorities, relevant 
information on this partly completed machinery. Transmission shall be via electronic or paper copies, and 
shall be without prejudice to the intellectual property rights of the manufacturer of the partly completed 
machinery.

The product to which this Declaration of Incorporation relates must not be put into service until the relevant 
machinery into which it is to be incorporated has been declared in conformity with the provisions of the 
Machinery Directive.

style, security, innovation...

GBrooks

Summary of Contents for AG55





























Reviews:

No comments

Brands by name

Popular brands

Load more brands