SZD-54-2
„Perkoz”
TECHNICAL SERVICE MANUAL
SECTION 12.
CLEANING AND MAINTENANCE
Issue II
April 2014
Revision
Allstar PZL Glider Sp. z o.o.
Doc No. 542.4.02
page 12.1
corrected
SECTION 12.
CLEANING AND MAINTENANCE
12.1. Canopy perspex
Wash perspex with plenty of warm (not hot!
up to 122
°F) water, wipe with
soft clean cloth or sponge.
In case if on perspex surface are greasy stains or oil type contamination, it is
allowed to add to water small amount of detergent or aqueous solution of soap. After
washing rinse thoroughly, wipe with soft clean cloth and allow to dry.
12.2. Painted exterior surfaces
Wash painted surfaces with warm water with mild detergent, rinse and wipe.
Avoid rinsing with water under pressure, use soft sponges or cloths. Be careful not to
get wet (not flooded) total and static pressure ports placed in sailplane nose and on
vertical stabilizer leading edge.
Painted surface may be maintained with wax or silicone polishing paste.
