The Instrument should be placed in a position with low humidity,
less dust, and keep it away from water, sunshine and strong light
source. Make sure of adequate ventilation, no corrosive gases, no
strong magnetic interference and to avoid any heat sources.
Before connecting to power, make sure the voltage used is same
as the instrument required, and the maximum rated load should
be sufficient for the instrument.
Please replace the power cord with same specs if the power cord
is damaged. Please make sure there’s nothing covered the power
cord and keep it away from crowds when in use.
Power off the instrument after operation and please disconnect
the plug if long time no use of the instrument and cover it with
something to prevent from dust.
Under the following circumstances, please disconnect the power
immediately and contact with your distributor.
Liquids into the Instrument;
Drenched by rain or water
Abnormal operation especially like abnormal sound or smell
During operation, the surface temperature of heating block inside
operation window could be very high. To avoid possible scald or
boiling of the liquid, do not touch the metal part when operating.
