Auto-Pure series Operation Manual
Chapter 4 Operation
─
16
─
Auto-Pure 48A Running interface
On the left side, it shows the current step info., when the exact reagent position start to run, then this
position will be highlighted, and there will be temperature display on the position of heating function.
The progress bar will display the progress and there’s also left time display on the top right corner.
Click “Pause” to pause or continue the program.
Click “Stop”, the program will stop and there will be check box. Click “Cancel”, program will be
continue and click “OK” the program run will be back to original place and the “Stop” button will
change to “Run Again”. Click “Run Again” to continue the program.
Click “Back” to return the previous menu.
Remark: If the drawer is open during operation, there will be below message box and the device
will stop to run, and the instrument will continue to run only after the drawer is closed.
