Auto-Pure series Operation Manual
Chapter 4 Operation
─
8
─
2. Connect the power
Connect one end of power cord to the instrument socket and the other to power (AC100~240V), then
turn on the power switch.
3. Install the reagent kit
3.1Install the customized reagent kit for Auto-Pure 20A & Auto-Pure 20B.
Open the drawer and mount the customized reagent kit on the heating strip, make sure the sample
well marked with 1 should be on the left side, then push back the drawer slowly.
Note: The shape of customized reagent kit of above products is different, while the installation is the
same.
3.2Install the customized reagent kit for Auto-Pure 24D/24BT
Open the drawer and place the kits with sample on the kits tray, then put the kits tray to the drawer
and press the kits with hand to make sure the kits fits the heating strip well , then push back the
drawer slowly and close the door.
Customized reagent kit
