QMS - CTL
Shock Mitigating Pedestal
Operation & Service Manual
This document and its contents are proprietary and confidential to Allsalt Maritime or its subsidiaries and
affiliates. Neither this document, nor any part of it may be disclosed or conveyed to, used or copied by or for any
third party without the prior written consent of Allsalt Maritime all rights reserved.
R-05 / Jan 2021 / 1 of 2
Adapter Mounting
A standard square adapter plate for
mounting with a 5.25” square hole pattern is
typically pre-installed.
Mount your seat to this adapter plate or
remove it to mount your own adapter or
another
SHOXS
adapter in its place.
All fasteners should be installed with a
medium-strength threadlocker such as
Loctite
®
243™.
Pedestal Mounting
The fastener size for pedestal mounting
should be
3/8”-16 UNC
or
3/8”-24 UNF
,
with sufficient length for full engagement
with the threads
of
the
mounting provisions (either bonded
stainless steel inserts or stainless steel
nylon lock nuts).
Minimum thread engagement should be
at
least 0.56”
for a 3/8” bolt.
All fasteners should be installed with a
medium-strength threadlocker such as
Loctite
®
243™.
