QMS - CTL
Shock Mitigating Pedestal
Operation & Service Manual
This document and its contents are proprietary and confidential to Allsalt Maritime or its subsidiaries and
affiliates. Neither this document, nor any part of it may be disclosed or conveyed to, used or copied by or for any
third party without the prior written consent of Allsalt Maritime all rights reserved.
R-05 / Jan 2021 / 1 of 2
Recommended Service
•
After each use
:
o
All components should be rinsed with
fresh water
•
Every
30 days
:
o
Check isolator pressure and ensure STATIC LIMIT check is normal
o
Inspect
all fasteners for security
Servicing Your Isolator
To provide flexibility, there are two points by which you can access the Schrader valve of your
isolator to check and service the pressure, as shown below.
This pedestal has internal
moving parts. Use caution
when using the
SIDE
ACCESS
Schrader valve.
Loss of pressure from
connecting an air supply
may cause the top portion
of the pedestal to sink.
CAUTION
