background image

8  |  ALL POWER™ EPW2000 POWER WASHER

www.allpoweramerica.com

ASSEMBLY INSTRUCTIONS (cont’d)

To assemble the enclosed parts, please refer 

to the steps that follow:

Step 1

 (Fig 2)

Insert the adjustable spray nozzle into the gun. 

Push and turn the adjustable nozzle clockwise 

onto the gun until hand tight to lock it in 

place. When the pieces are joined properly, 

you cannot separate the two components by 

pulling straight out on the adjustable nozzle. 

All attachments must be inserted into the gun 

for proper use.

(Fig 2)

Step 2 

(Fig 3)

Attach the L-shape coupler end of the 

extension hose (N) into the water outlet and

the other end into the hose reel (H).

(Fig 3)

Step 3 

(Fig 4)

Fasten the high pressure hose tightly  

onto the gun assembly and tighten to  

avoid leakage.

(Fig 4)

Step 4 

(Fig 5)

Attach the hose connector to pressure washer. 

Before attaching the connector to the male

fitting, remove the plastic cap, which is 

inserted onto the male fitting on the pressure 

washer before shipping. This plastic cap 

can be discarded once removed. After both 

components have been installed, attach the 

garden hose with connector screw on the 

pressure washer. Connect the garden hose to 

the waterspout.

  

8

Step 3 

 

Attach the high-pressure hose to the male fitting on the front of the pressure washer.  
Before attaching the high-pressure hose to the male fitting, remove the plastic cap, 
which is inserted onto the fitting before shipping.  This plastic cap can be discarded 
once removed.  Twist on tight to avoid leakage. 

 

Step 4 

 

Attach the hose connector to pressure washer. Before attaching the connector to the male 
fitting, remove the plastic cap, which is inserted onto the male fitting on the pressure washer
before shipping. This plastic cap can be discarded once removed. After both components have
been installed, attach the garden hose with connector screw on the pressure washer. Connect 
the garden hose to the waterspout.

1600 PSI Pressure Washer

(Fig 5)

8

     

ASSEMBLY/OPERATION |  

OWNER’S MANUAL

Summary of Contents for EPW2000

























Reviews: