ALLPOWER EPW2000, Owner'S Manual

Page: 11 / 24

ALL POWER™ EPW2000 POWER WASHER | 11
Total Stop System
The pressure washer is fitted with a total stop
system to protect the motor when in use.
When the trigger is released the motor will
stop. When the trigger is squeezed the motor
will start up again.
Using Detergents
Biodegradable detergents are specifically
formulated to protect the environment and
your pressure washer. These Detergents will
not clog the filter and will protect the internal
parts of the pressure washer for a longer life.
(Fig 9)
Step 1
(Fig 9)
Open the cover of the detergent bottle by
twisting it off.
Step 2
(Fig 9)
Fill the detergent bottle with any approved
liquid detergent. Close the cover.
Step 3
(Fig 10)
Turn the adjustable nozzle to end of “ - ”,
put the pressure washer into low-pressure
mode.
(Fig 10)
Step 4
To apply the detergent cleanser to your working
area, turn the pressure washer switch to the ON
position. Pull the trigger to operate the unit.
The pressure washer will mix the detergent with
water. Do not allow the detergent to dry on the
object that you are cleaning.
WARNING
NEVER USE PRODUCTS WITH BLEACH OR
CHLORINE OR ANY OTHER CORROSIVE
MATERIALS, INCLUDING LIQUIDS CONTAINING
SOLVENTS (I.E. GAS, OILS ETC), TRI-SODIUM
PHOSPHATE PRODUCTS, AMMONIA, OR ACID-
BASED CLEANERS. THESE CHEMICALS WILL
HARM THE UNIT AND CAUSE DAMAGE TO THE
SURFACE BEING CLEANED. ALWAYS READ THE
LABEL.
Step 5
To clean the working area, turn the adjustable
nozzle to end of “ + ”, return it to high-pressure
mode. Spray high-pressure water onto the
work area to rinse off the work area and any
remaining detergent.
(Fig 11)
OWNER’S MANUAL | DETERGENTS/CLEAN-UP AND STORAGE 11