ALLPOWER EPW2000, Owner'S Manual

Page: 13 / 24

ALL POWER™ EPW2000 POWER WASHER | 13
OWNER’S MANUAL | CLEANING TIPS 13
MAINTENANCE
• This pressure washer is supplied with
a closed lubrication system, so no
addition of oil is needed.
• Check all hoses and accessories for
damage prior to use.
• Check the water intake filter periodically
for deposits. Clean this filter regularly
for maximum performance.
8
Step 3
Attach the high-pressure hose to the male fitting on the front of the pressure washer.
Before attaching the high-pressure hose to the male fitting, remove the plastic cap,
which is inserted onto the fitting before shipping. This plastic cap can be discarded
once removed. Twist on tight to avoid leakage.
Step 4
Attach the hose connector to pressure washer. Before attaching the connector to the male
fitting, remove the plastic cap, which is inserted onto the male fitting on the pressure washer
before shipping. This plastic cap can be discarded once removed. After both components have
been installed, attach the garden hose with connector screw on the pressure washer. Connect
the garden hose to the waterspout.
1600 PSI Pressure Washer
(Fig 13)
WARNING
Always test the spray in an area free and clear
of people and objects before you spray at the
intended cleaning surface.
CLEANING TIPS
Wood and Vinyl Decks
Rinse deck and surrounding area with fresh
water. If using detergent, fill the detergent
reservoir and apply to the area being cleaned
at low pressure. For optimal results, reduce
your work area to smaller sections and
clean each section one at a time. Allow the
detergent to rest on the surface for a few
minutes and then rinse at high pressure.
Do not let the cleanser dry. Always clean
from left to right and top to bottom for best
results. Rinse at high pressure using the fan
spray keeping the tip of the spray nozzle at
least 6-9 inches from the cleaning surface.
Maintain a further distance from the cleaning
area when using a direct spray.
For softer woods, increase the distance from the
cleaning area.
CAUTION
Cement Patios, Stone, and Brick
Rinse cleaning and surrounding area with
fresh water. If using detergent, fill the
detergent reservoir and apply to the area
being cleaned at low pressure. Rinse at high
pressure using the fan spray in a sweeping
motion keeping the tip of the spray nozzle
at least 3-6 inches from the cleaning surface.
Maintain a further distance from the cleaning
area when using a direct spray.
Cars, Boats, and Motorcycles
Rinse cleaning and surrounding area with
fresh water. If using detergent, fill the
detergent reservoir and apply to the area
being cleaned at low pressure. To achieve the
best results, clean one side at a time. Allow
the detergent to rest on the surface for a few
minutes, but do not let the detergent dry.
Rinse at high pressure using the fan spray in a
sweeping motion keeping the tip of the spray
nozzle at least 8 inches from the cleaning
surface.