AWPS Quick Install Guide
20
5. Making Network Connections
Connecting Network Devices
The AWPS Series switches are designed to be connected to 10, 100 or 1000Mbps network cards in
PCs and servers, as well as to other switches and hubs. It may also be connected to remote devices
using optional SFP transceivers.
Twisted-Pair Guidelines
Each device requires an unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable with RJ-45
connectors at both ends. Use Category 5, 5e or 6 cable for 1000BASE-T connections, Category 5 or
better for 100BASE-TX connections.
Cabling Guidelines
The RJ-45 ports on the switch support automatic MDI/MDI-X pinout configuration, so you can use
standard straight-through twisted-pair cables to connect to any other network device (PCs, servers,
switches, routers, or hubs).
See Appendix B for further information on cabling.
CAUTION:
Do not plug a phone jack connector into an RJ-45 port. This
will damage the switch. Use only twisted-pair cables with RJ-45
connectors that conform to FCC standards.
