background image

4.  Warranty Information 
 

One Year Limited Hardware Warranty 

 

Allo.com  provides  a  one  (1)  year  hardware  warranty.  Allo.com  warrants  to  customer  that  this 
product  will  conform  to  its  published  specifications  and  will  be  free  from  defects  in  material  and 
workmanship  at  the  time  of  delivery  and  for a  period  of  one  year  thereafter. Without limiting  the 
foregoing, this warranty does not cover any  defect resulting from, (i.) any design or specification 
supplied by an entity other than  Allo.com, (ii.) non observance of technical operating parameters 
(e.g.,  exceeding  limiting  values),  or  (iii.)  misuse,  abuse  to  abnormal  conditions  or  alteration  by 
anyone other than Allo.com. 

 
Replacement, Repair and Refund 

 
After  a  receipt  of  an  RMA  request  (Return  Merchandise  Authorization),  Allo.com  may  replace, 
repair  or  refund  the  Analog  Telephone  Adapter  unit  depending  on  the  condition  of  the  returned 
unit.  In  order  to  receive  an  RMA  number,  please  contact  the  store  where  you  purchased  the 
product, or visit our website at http://www.allo.com/support/. 

 

 

5.  Compliance and Safety Information 

 

5.1. 

 Installation Precautions 

 

5.1.1.  Never install the device during a lightning storm 
5.1.2.  Never  install  Telephone  or  Ethernet  jacks  in  wet  locations  unless  the  jack  is 

specifically designed for wet locations 

5.1.3.  Never touch un-insulated Telephone / Ethernet wires or terminals unless the line 

has been disconnected at the network interface 

5.1.4.  Use caution when installing or modifying Telephone / Ethernet lines 
 
To prevent fire or shock hazard, do not expose this product to rain or any type of excess 
moisture. If accidentally dropped into water, the Power Adapter should immediately be un-
plugged from the wall along with the Telephone and Ethernet cables. 

 
 
5.2. 

 FCC and CE Notice 

 

5.2.1.  This equipment has been tested and found to be in compliance with the limits for 

a  Class  B  Digital  device  in  accordance  with  the  specifications  in  part  15  of  the 
FCC rules 

5.2.2.  This device has also been granted a registration number by the FCC under part 

68 rules and regulations for direct connection to the telephone lines 

5.2.3.  This  product  bears  the  CE  marking  indicating  compliance  with  the  89/336/  EEC 

directive 

5.2.4.  Modifications to this product not authorized by Allo.com could void FCC Approval 

terminating end user

’s authority to use this product 

5.2.5.  The REN is useful to determine the quantity of devices you may connect to your 

telephone line and still have those entire devices ring when your number is called. 
In most, but not all cases, the sum of the RENs of all devices should not exceed 
five (5). To be certain of the number of devices you may connect to your line, as 
determined  by  the  REN,  you  should  call  your  local  telephone  company  to 
determine the maximum REN for your calling area 

Summary of Contents for CRA 210









Reviews: