Allo E1/T1 PRI Card Quick Installation Guide
2. Hardware Setup
Digital Card
1.
Insert the Digital E1/T1 card in the PCIe slot of the Server.
2.
Check if the installed PRI card is detected using the “lspci” command.
3.
If the card is recognized, the following output will be displayed. Please search for
Allo ID (1d21).
# lspci
Below Table lists the device ID and the number of ports supported.
Device Id
Model Number
Card Type
1410
4aCP1e
1 port PRI Card
1420
4aCP2e
2 port PRI Card
1440
4aCP4e
4 port PRI Card
1480
4aCP8e
8 port PRI Card
If the PRI card is not recognized by the system, you have to power off and take out the card,
and re-insert it in another PCIe slot.