![background image](http://html1.mh-extra.com/html/allo-com/4acp1e/4acp1e_installaton-manual_2903729011.webp)
Allo E1/T1 PRI Card Quick Installation Guide
3.3 Installation of Asterisk
Download the latest asterisk version from:
http://downloads.asterisk.org/pub/telephony/asterisk/
and extract the asterisk tar file by giving
following command.
#wget
http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-11-
Go to asterisk folder and compile the packages as following
To install asterisk give the following commands:
[root@pbx1 asterisk-11.4.0]#./configure
# make
# make install
# make config
If this is your first Asterisk Install, you should install the sample configuration files, to do this run:
# make samples
4.
Software Configurations
Add “alloPL4xxp” at the end of /etc/dahdi/modules file, so that while starting dahdi driver Allo
card modules will load automatically.
Add the line <include “dahdi-channels.conf”> in /etc/asterisk/chan_dahdi.conf
file.
By default the card is ready to use in E1 mode
4.1 T1 mode settings
To configure the card in T1 signaling mode, please add the following,
(i)
Add “
options alloPL4xxp default_linemode=t1”
at the end of
/etc/modprobe.d/dahdi.conf
4.2 Dahdi Configuration
After Dahdi driver installation run the following commands
# /etc/init.d/dahdi start