Allnet ALL69000 User Manual Download

Page: 68 / 148

NFS Share

Item

Description

Hostname

Enter the name or IP address of the host

Privilege

Host has either read only or writeable access to the folder.

Guest System Support

There are two selections available:

•

Unix / Linux System

•

AIX (Allow source port > 1024)

Choose the one which best fits your needs.

IO Mapping

There are three selections available:

•

Guest system root account will have full access to this share
(root:root).

•

Guest system root account will be mapped to anonymous user
(nobody:nogroup) on NAS.

•

All user on guest system will be mapped to anonymous user
(nobody:nogroup) on NAS.

Choose the one which best fits your needs.

Apply

Click to save your changes.

Summary of Contents for ALL69000





















































































































































Search results

Summary of Contents for ALL69000

Reviews:

Related manuals for ALL69000

Brands by name

Popular brands

Allnet ALL69000, User Manual

Search results

Summary of Contents for ALL69000

Reviews:

Related manuals for ALL69000

Brands by name

Popular brands