21
Display Mode
During normal operation, the LCD will be in
Display
Mode
.
Display Mode
Item
Description
Host Name
Current host name of the system.
WAN
Current WAN IP setting.
LAN
Current LAN IP setting.
Link Aggregation
Current Link Aggregation status
System Fan1
Current system fan1 status.
System Fan2
Current system fan2 status.
CPU Fan
Current CPU fan status
2009/05/22 12:00
Current system time.
Disk Info
Current status of disk slot has been installed
RAID
Current RAID status.
The ALL69000 will rotate these messages every one-two seconds on the LCD display.
USB Copy
The USB Copy function enables you to copy files stored on USB devices such as USB disks
and digital cameras to the ALL69000 by press button. To use USB copy, follow the steps
below:
1. Plug your USB device into an available USB port on the Front end.
2. In
Display Mode
, press the
Down Button
(
▼
).
3. The LCD will display “
USB Copy?
”
4. Press
Enter
( ) and the ALL69000 will start copying USB disks connected to the front
USB port.
5. All of data will be copied into system folder named “USB copy”.
Management Mode
During setup and configuration, the LCD will be in
Management Mode
.
To enter into Management Mode, press
Enter (
)
and an “
Enter Password
” prompt will show
on the LCD.
At this time, the administrator has to enter the correct LCD password. System will check
whether the correct LCD password has been entered. The default LCD password is “
0000
”. If
correct password is entered, you will enter into the
Management Mode
menu.
Management Mode
Item
Description
WAN Setting
IP address and netmask of your WAN ports.
LAN Setting
IP address and netmask of your LAN ports.
Link Agg. Setting
Select
Load Balance, 802.3ad
or
Failover
.
Change Admin Passwd
Change administrator’s password for LCD operation.
Reset to Default
Reset system to factory defaults.
Exit
Exit
Management Mode
and return to
Display Mode
.