18
Chapter 3: First Time Setup
Overview
Once the hardware is installed, physically connected to your network, and powered on, you
can configure the ALL69000 so that it is accessible to your network users. There are two ways
to set up your ALL69000: using the
ALLNET Setup Wizard
or the
LCD display
. Follow the
steps below for initial software setup.
ALLNET Setup Wizard
The handy ALLNET Setup Wizard makes configuring ALL69000 a snap. To configure the
ALL69000 using the Setup Wizard, perform the following steps:
1. Insert the installation CD into your CD-ROM drive (the host PC must be connected to
the network).
2. The Setup Wizard should launch automatically. If not, please browse your CD-ROM
drive and double click on
Setup.exe.
3. The Setup Wizard will start and automatically detect all ALLNET storage devices on
your network. If none are found, please check your connection and refer to
Chapter 7:
Troubleshooting
for assistance.
4. Select the ALL69000 that you like to configure.
NOTE
For MAC OS X users, double click on ALLNET Setup Wizard .dmg file.