Allnet ALL2295, User Manual

Page: 16 / 141

Full HD Vandal Proof IP Outdoor Dome Camera Version 1.0
16
Step 4:
Unscrew the module-fastened
screw, as indicated in the
figure.
Step 5:
Press the sides of the snap-on
module, as indicated in the
figure, and detach it from the
Dome Camera
’s housing.
Step 6:
Mark the positions of the four screw holes on the base of the Dome
Camera at the chosen installation location.
Step 7:
In the marked locations, drill each hole slightly smaller than the
supplied screw anchors.
Step 8:
Put supplied anchors into these drilled holes.