ITA
ENG FRA ESP DEU POR
5 / 12
6-1622595 rev.06 13/01/2017
Compatible from
firmware version
CSMAM02
3 Programming Menu
This procedure must be carried out ONLY by the installer and ONLY during the installation of the system.
WARNING: the motor must be still, preferably in closed position, in order to access the programming menu!
8888888888888888
8888888888888888
3.1 Activation and selection of the programming menu
The control unit CT INVERTER AM is equipped with
THREE
user menus
(
MENU A, MENU B, MENU C
)
, by which it is possible to regulate, program
and modify all functional parameters. Follow the indications on the display during the programming phases.
MENU A
- allows to activate the
optional functions
and to select the
intervention modalities of the security systems
.
MENU B
- it is dedicated
to the learning of the runs
, to the operations related to the
manual movement
and to the regulation of the
control
parameters of the motor
MENU C
- menu for
auxiliary configurations
for user’s support
2
1
Stop the motor and get in safety conditions
The display must not show any indications
The display shows the
first entry available
Select an entry of the menu (see following table); shortly press key
P3 to scroll down to the following index,
or key
P1 to go back to
the previous menu
3
The display shows the entry selected.
Some parts of the control unit are subject to dangerous voltages!
Pay attention during the phase of manual accessing to the control board
4
Confirm
the entry selected by
pressing key P2
The first line
of the display shows
the present setting
for
the function selected.
The second line
of the display shows the
possible
modification settings
according to the parameter
selected (see specific paragraphs)
5
Modify the status of the parameter
by following the
indications written in the second line of the display
by using
keys P1 e P3
.
The first line
of the display shows
the present setting
for
the function selected.
The second line
of the display shows the
possible
modification settings
according to the parameter
selected (see specific paragraphs)
6
Confirm
the setting selected by
pressing key P2
The display indicates the correct storage of data and then
shows the entry selected
7
It is possible to
modify other parameters
(go back to point 3) or to
exit the programming menu
by selecting the option
EXIT
(confirm by pressing key P2)
Exit from the menu is confirmed by the absence of
indications on the display
AUTOMATIC EXIT FROM THE MENU: the menu exits automatically in case of long inactivity (longer than 15 seconds)
8888888888888888
8888888888888888
8888888888888888
8888888888888888
Press and keep pressed key
P1 for 2 seconds
in order to
activate
MENU A
Press and keep pressed key
P2 for 2 seconds
in order to
activate
MENU B
Press and keep pressed key
P3 for 2 seconds
in order to
activate
MENU C
LANGUAGE SETTING
Press key P3 for 2 seconds. Confirm with key P2.
Select the language by pressing either P1 or P3.
Confirm with key P2
It is suggested to select the language before any other operations
