Allmand Maxi-Lit II, Operator'S Manual

Page: 39 / 260

Not for
Reproduction
MAXI-LITE II / MINE SPEC / RIG SPEC
3-9
3 Operate the upper hand crank winch counter-
clockwise to lower the lights to the lowest vertical
position.
WARNING
TIP HAZARD
Lowering the light tower to the horizontal position
before lowering the mast to the lowest vertical
position could cause the trailer to tip over, resulting
in death or serious injury. Always use the hand crank
winch on the light tower to lower the tower vertically
first, before using the winch on the side of the trailer
to lower the light tower to the horizontal towing
position.
4 Operate the lower hand crank winch on the side of
the trailer clockwise to take up any slack in the cable.
5
Disengage the automatic spring lock.
6 Operate the lower hand crank on the side of the
trailer counterclockwise to lower the mast into the
horizontal towing position.
7
Secure the light cords into hook on the rear tower
support.
8 Secure the rear support release pin, locking the mast
to the rear tower support for towing.
Spring
lock pin
Left Side
Right Side
Handle
Release
pin
Hand
crank
Hand crank
winch
Upper
knob
Light
tower
en