Allied AR110C, Safety, Operation And Maintenance, Page: 41 / 60

Allied Construction Products, LLC www.alliedcp.com
SOM576701_14jan
30
10.0 Changing the Breaker Tool – [cont’d]
10.5 Tool Re-Lubrication – AutoLube Options
Automatic grease dispensing systems provide
continuous re-lubrication of the tool and bushings
during operation. When installed correctly and
properly maintained, automatic lubricators eliminate
the need to stop work every two hours to re-lubricate
the tool manually.
Allied offers a choice of automatic grease dispensing
systems that are mounted on the carrier or breaker
mounted.
10.5.1 Carrier Mounted Lubricator - CML Series
Fig 10-11 Carrier Mounted AutoLube System
The optional Autolube CML series is designed for
carrier mounting. This fully automated grease
dispenser is available in several configurable options
that include custom installations that suit virtually any
breaker. Features of the CML series include a large
refillable reservoir and a low level circuit that
immobilizes the breaker and signals the operator
when the reservoir reaches the low level mark.
The Autolube CML series is electrically powered and
the motor can drive up to three pumping elements.
Allied offers installation kits that help facilitate
mounting. Kits for Allied breaker models are
coordinated to specific carrier and breaker
combinations. Universal kits are available for non-
Allied breaker models. When ordering kits, it is
necessary to provide the make and model of the
carrier and breaker. Components, such as pumping
elements and feed line requirements, will vary with
carrier and breaker size.
10.5.2 Hammer Mounted Lubricator – HML Series
The optional HML-series lubricator is compact and
mounts directly to the breaker. There are no electric
or hydraulic connections. Grease is dispensed when
the pump is pulsated by the breaker. The refillable
reservoir is transparent and allows easy monitoring.
Delivery is adjustable to match different size breakers
and requires no special tools.
Fig 10-12 Hammer Mounted AutoLube System
Installation kits for both the CML-series and HML-
series are available from Allied. These kits do not
include Chisel paste. Order separately.
10.6 Chisel Paste
Allied Chisel Paste is a specialty lubricant made for
use with all breakers. Developed exclusively for
bushing and tools, chisel paste (when applied
regularly) offers supreme protection against friction-
related wear from heavy-loading.
Chisel Paste is specially formulated from a unique
blend of lubricants that also include solids of
molybdenum disulfide [MoS2], graphite and copper.
These solids (typically not found in General Purpose”
and “Multi-Purpose” grease) are key elements of
Chisel Paste that help extend the service life of
bushings and tools.
IMPORTANT
Pre-lubricate the tool before inserting into front
head. Keep dirt and rocks from contaminating the
grease.
If Allied Chisel Paste is not used, re-lubrication
frequency must be increased. Use high-quality EP
type grease that contains a high percentage of
molybdenum disulfide [MoS2] and formulated for
use in high-temperature applications.