Allied AR110C, Safety, Operation And Maintenance, Page: 10 / 60

Allied Construction Products, LLC www.alliedcp.com
SOM576701_14jan
ix
Table of Contents - [cont’d]
SECTION Pg.
7.4.6 Inspect Piston…………………………..….….. 19
7.5 High-Pressure Accumulator………………….... 19
7.6 Inspect Mounting Pins……………………….…… 19
7.7 Inspect Threaded Fasteners………………..…… 20
7.8 Inspect Hoses…………………..…….…………... 18
7.9 Check Oil & Filter on Carrier…………..….…….. 18
7.10 When to Measure Oil Pressure……………….. 18
7.10.1 Safety Precautions…………………..……… 20
7.10.2 How To Measure Oil Pressure……………… 21
8.0 Lifting, Handling, Transporting & Storage 22
8.1 Transport Breaker Independently of Carrier…… 22
8.2 Transport Breaker Installed on Carrier………… 22
8.3 Breaker Storage – Short Term (< 14 days)…… 22
8.4 Breaker Storage – Long Term (> 14 days)……. 22
9.0 Attach / Remove Breaker To & From Carrier 23
9.1 Carrier Requirements…………..……….……… 23
9.2 Mounting Kits…………………………………….. 23
9.3 Tools Required to Attach the Breaker………… 23
9.4 Attach the Breaker to the Carrier………………. 23
9.5 Connect Supply and Return Lines……...……… 24
9.6 Remove the Breaker from Carrier……………... 25
10.0 Changing the Breaker Tool……………….… 26
10.1.1 Safety Pre-cautions…………………………. 26
10.1.2 Tools Required……………….………………. 26
10.1.3 Overview of Tool Retainer System……..…. 26
10.1.4 Removing the Tool…………………………. 27
10.2 Inspect & Prepare Tool for Installation……….. 27
10.3.1 Installing Tool In Front Head………..…..….. 27
10.3.2 Tools Required………………………………. 28
10.4 Tool Re-Lubrication – Conventional Method 28
10.4.1 Avoid Costly Lubrication Mistakes…….…… 29
10.5 Automatic Lubrication Systems……………….. 30
SECTION Pg.
10.5.1 Carrier Mounted Lube Systems…………… 30
10.5.2 Breaker Mounted Lube Systems………….. 30
10.6 Chisel Paste……………………………………. 30
11.0 Tool Selection – Application Guide….…… 31
11.1 Match the Application………………………….. 31
11.1.1 Penetrative vs. Impact Breaking……… 31
11.2 Working Length of Tool………..……………… 31
11.3 Re-Sharpening Technique………………….. 31
12.0 Accumulator N2 Gas Charge Tool…………. 32
12.1 Accumulator & Charge Tool - General……… 32
12.2 Tools Required to Charge Accumulator……… 33
12.3 How to Connect the Charge Tool…………….. 33
12.4 How to Test / Measure Gas Charge…………. 33
12.5 Charging the Accumulator……………..…….. 33
12.6 Removing the Charge Valve………………….. 34
13.0 Troubleshooting Guide……………………… 35
14.0 Technical Data….………..………………. 39
14.1 Definition of Terms…………………….………. 39
14.2 Testing the Hydraulic Circuit……………..….. 40
14.3 Technical Specifications 41
15.0 Service Records………………….………….. 50