Allied 300, Technical Manual, Page: 6 / 66

Allied Construction Products, LLC Technical Manual Ho-Pac 300, 300B & 500, 500B
iv
SAFETY INFORMATION (cont’d)
Label Description and Location
This section reviews the safety and
identification labels affixed to the Allied
equipment. Part numbers for labels and
their location on the equipment are found on
the following page.
Keep all safety labels clean. Words and
illustrations must be readable. Before
operating this equipment, replace damaged
or missing labels.
Location Label Description
1
ID PLATE (Identification Plate) - contains
identifying information about the equipment
including: Manufacturer’s Name and
Address, Product Name, CE compliance
marking, Model Number, Serial Number, Year
of Manufacture, and Mass
2
LIFT POINT- Decal identifies approved lift
points of the Ho-Pac.
3
STAY CLEAR - Decal alerts personnel and
by-standers to maintain a safe distance from
the Ho-Pac during operation.
4
READ INSTRUCTION - Decal indicates that it
is important to read the manual for detailed
explanations and instructions
5
HOT SURFACE - Decal indicates hydraulic
components that become hot during
operation. These include the quick disconnect
couplings, hoses, hose fittings, valve and
motor. Avoid contact with hot parts.
6
ALLIED LOGO
– This decal is the Allied
brand identifier and is a registered trademark
of Allied Construction Products, LLC.
7
 
OIL FILL - Decal identifies the location to add
oil to fill the oil reservoir.
8


OIL LEVEL - Decal identifies the location to
check the oil level.
9
300, 300B, 500 or 500B
MODEL NUMBER - Decal indicates the Ho-
Pac model number.
10
PRESSURE I.D.
– A red colored cable tie
marked “PRESSURE IN” is attached to the
pressure hose for ease of identification
between hoses.