Allied 300, Technical Manual, Page: 14 / 66

Allied Construction Products, LLC Technical Manual Ho-Pac 300, 300B & 500, 500B
3
SECTION 3.0
WARRANTY PROTECTION SUMMARY
3.1 Overview
The Allied attachment is delivered
assembled, lubricated, and factory tested.
Upon receipt of the equipment, inspect for
possible shipping damage.
For every new Ho-Pac, Allied requires that a
Warranty Registration form be completed
and returned to Allied. The form has a
section to record information about the
carrier on which the attachment is being
installed.
To keep the Allied equipment operating
within its performance limits, familiarize
yourself with the technical specifications
section of this manual. Follow the
specifications when calibrating the carrier.
Improper installation, including failure to
calibrate the carrier correctly may result in
loss of performance or subject the
equipment to conditions beyond their
design. Use of non-Allied parts, unapproved
service methods, modifications to the
attachment, or installation, operation and
maintenance, not in accordance with the
instructions outlined in this manual may
cause equipment failure or personal injury.
For details regarding warranty terms and
conditions, refer to document A100668.
3.2 Owner’s Responsibilities
When properly installed, operated and
maintained by qualified personnel, the Allied
attachment will remain productive with a
minimum of service. The following outlines
general maintenance policies required for all
Ho-Pac models. The equipment owner is
strongly encouraged to further develop
these general guidelines and adapt them in
order to manage particular applications and
operating environments.
Ensure that personnel entrusted with
installation, operation, maintenance and
transporting of the Allied equipment adhere
to the following:
Read and thoroughly understand the
information and procedures detailed in
this manual.
Understand proper operating techniques
for all recommended applications.
Use the Allied attachment only if it is in
sound operating condition. Immediately
rectify any faults that, if left uncorrected,
could lead to personal injury or further
damage.
Use the Allied attachment only for the
purpose for which it is intended.
Adhere to the specifications listed in this
manual and operate the Allied
equipment within its performance limits.
Appoint Who Does What. Ensure that all
personnel understand what their specific
responsibilities include.
1. Establish maintenance
responsibilities to be performed
by the OPERATOR.
2. Establish maintenance
responsibilities to be performed
by the SERVICE TECHNICIAN.
Recognize problems and know how to
take corrective action as detailed in the
Troubleshooting Section of this manual.
Conduct regular checks and inspections
as scheduled in the Care and
Maintenance Section of this manual.
Allow only qualified operators and Allied
trained service technicians to perform