Allied 300, Technical Manual, Page: 57 / 66

Allied Construction Products, LLC Technical Manual Ho-Pac 300, 300B & 500, 500B
46
PARTS INFORMATION - 500
Table 12.6
Model 500 Dynamic Assembly & Suspension
Item Part No. Description Qty Remarks / Specifications
--- 102693 Dynamic Assembly & Suspension
1 102689 Eccentric Housing 1 Configured with Bolt-on Compaction Plate
2 102690 Eccentric 1
3 102691 Eccentric Shaft 1
4 102692 Bearing Housing 2
5 708621 Hex Head Cap Screw 8
½” – 1 ¼
6 708512 Flat Washer 8
7 714714 Bearing 2
8 714715 Cover Plate 1
½”
9 708513 Hex Head Cap Screw 6
7/16” – 1 ¼
10 708514 Flat Washer 8
7/16”
11 714717 Spacer 1
12 563446 Socket Head Cap Screw 2
13 102694 Gasket 1 Motor
14 102695 Gasket 2 Bearing Housing
15 A102697 Gasket 1 Bearing Cover
16a 714721
Rubber Spring Mount 4
Former spring 714721 is discontinued.
Replaced by spring kit part no. 574885
(a)
16b 574885
Follow Figure 12-7b for proper arrangement
of hardware
17a 102490 Bushing 4 Required on slotted frames
17b 572080 Lock Washer 4*
½” (* Pair) Not used on busing side
18a 102491 Hex Nut
8
Not used with newer spring
18b 574341 Hex Head Cap Screw
½” – 1 1/8”
Torque to 80 ft/lbs [108 N

m]
19 714719 Hex Head Cap Screw 6 For use with bolt-on compaction plates
20 816359 Flat Washer 6 For use with bolt-on compaction plates
21 A102780 Relief Plug 1
22 656775 Socket Head Plug 2
---
102688 Compaction Plate (STD)
1
Standard size 12”x27”
102748 Compaction Plate (OPT)
Optional size 18”x22”
a)
Spring mount kit, 574885 includes 1-Spring 574574, 2-HHCS 574884, 1-(Pair) Washer 572080