Allied Vision Technologies F-201B AVT Dolphin, Manual, Page: 67 / 72

67
9.2.11 Delayed Integration enable
A delay time between initiating exposure on the sensor and the activation edge of the
IntEna signal can be set using this register. The
on/off flag activates/deactivates
integration delay. The time can be set in µs in DelayTime .
L
Please note that only one edge is delayed.
L
If IntEna_Out is used to control an exposure, it is possible to have a variation in
brightness or to precisely time a flash.
Figure 43 Delay time
Offset Name Field Bit Description
0xF1000340 IO_INTENA_DELAY Presence_Inq [0] Indicates presence
of this feature
(read only)
--- [1..5]
ON_OFF [6] Enable/Disable
integration enable
delay
--- [7..11]
DELAY_TIME [12..31] Delay time in µs
9.2.12 Incremental decoder (SW from 0.84, FW from 0.14)
The incremental decoder is a 12-bit counter. It counts upwards, if INC1 is “high” and
during a rising edge for INC0. It counts downwards, if INC1 is “low” and during a rising
edge for INC0.
The
Reset input resets the counter to “0”. The input signals in this mode are fixed:
Input 1 = INC0,
Input 2 = INC1,
Input 3 = Reset
L
All inputs must be enabled for this mode.