Allied Telesis GS950 PS Series, Installation Manual, Page: 22 / 108

Chapter 1: Overview
22
 Single-port bidirectional 1000Mbps SFP 1000Base-SX/LX fiber
optic transceivers

1000Mbps 1000Base-T copper transceiver
Note
Transceivers are purchased separately. For a list of supported
transceivers, refer to the product’s data sheet on the Allied Telesis
web site.
System LEDs
The port LEDs are briefly described here:
 Power SYS LED
 Maximum PoE+ LED
The system LEDs are described in “SYSTEM LED” on page 30.
Port LEDs
The port LEDs are briefly described here:

Link/activity and PoE+ LEDs for the copper ports. Refer to “Link/
Activity and PoE LEDs” on page 31.
 Link/activity LEDs for the SFP ports. Refer to “SFP LEDs” on
page 34.

eco-Friendly button for turning off the LEDs to conserve electricity.
Refer to “eco-Friendly Button” on page 36.
Installation
Options
The switch supports the following installation options:

Standard 19-inch equipment rack

Desk or table

Wall
Power
Conservation
The switch has the following power conservation features:
 eco-Friendly button to turn off the port LEDs when the system is
not being monitored

IEEE 802.3az Energy-Efficient Ethernet (EEE) reduces power
during periods of no data activity
 High-efficiency power supply
MAC Address
Table
Here are the basic features of the MAC address table:

Storage capacity up to 16K MAC address entries

Automatic learning and aging