Allied Telesis GS950 PS Series, Installation Manual, Page: 36 / 108

Chapter 1: Overview
36
eco-Friendly Button
You can use the eco-Friendly button, shown in Figure 15, to perform the
following functions:
 Toggling the eco-Friendly mode: Pressing the button for less than
five seconds toggles the front panel LEDs on and off. You might
turn off the LEDs to conserve electricity when you are not using
them to monitor the switch. (The SYS LED is not controlled by the
eco-Friendly button.)
 Rebooting the switch: Pressing and holding the button for five to
nine seconds reboots the switch. You might perform this action if
the switch is experiencing a problem.
 Restoring the default settings: Pressing and holding the button for
more than 10 seconds restores the factory default values to the
switch’s configuration. You might perform this action to discard the
switch’s current configuration or if you have forgotten the
management login password.
Note
Restoring the default settings returns the management IP address to
192.168.1.1. You may need to change the IP address on your
workstation before you can connect to the switch again. Refer to
“Starting the First Management Session” on page 85.
Figure 15. eco-Friendly Button
eco-Friendly
Button