manualshive.com logo in svg

Allied Telesis AT-2874SC, Installation And User Manual

Share
Download
Allied Telesis AT-2874SC Installation And User Manual Download Page 57

Chapter 4: Modifying Advanced Properties

57

Large Send Offload v2 (IPv6)

The Large Send Offload v2 (IPv6) feature allows you to control the load of 
sending out large packets. When this feature is enabled, the adapter 
segments large packets for IPv6 traffic and reduces the CPU load.

To enable or disable the Large Send Offload v2 (IPv6) feature, do the 
following:

1. Access the Advanced Properties.

See “Accessing Advanced Properties” on page 47. 

2. Select 

Large Send Offload v2 (IPv6) 

in the Property box.

The Large Send Offload v2 (IPv6) page is displayed as shown in 
Figure 34.

Figure 34. Large Send Offload (IPv6) Page

3. Select one of the following options:

Disabled —

 The adapter does not segment packets for IPv6 

traffic.

Enabled —

 The adapter segments large packets up to 256kb for 

IPv6 traffic before sending them out. This is the default setting.

4. Click 

OK

.

Summary of Contents for AT-2874SC





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands