Ethernet Protection Switching Ring (EPSR)
show epsr debug
33
show epsr debug
Syntax
SHOW EPSR[={
epsr-name
|ALL}] DEBug
Description
This command show the debugging modes enabled on each EPSR instance, or
all EPSR instances (
Figure 1-15
,
Table 1-4
).
Figure 1-15: Example output from the
show epsr debug
command
Related Commands
show epsr
Parameter
Description
EPSR
The EPSR instance whose debugging details are displayed.
Default:
all
epsr
-
nam
e
The name of the EPSR instance. This can be a character
string, 1 to 15 characters long. Valid characters are
uppercase letters (A-Z), lowercase letters (a-z), digits (0-9),
the underscore character ("_"), the hyphen character ("-").
The
epsr-nam
e cannot be ALL.
ALL
All EPSR instances.
DEBug
Displays the debugging information about the specified EPSR instance, or all
EPSR instances.
EPSR Name Enabled Debug Modes Output Timeout
--------------------------------------------------------------------------------
blue MSG,STATE Asyn 0 (16) None
red None
--------------------------------------------------------------------------------
Table 1-4: Parameters displayed in the output of the
show epsr debug
command
Parameter
Meaning
EPSR Name
The name of the EPSR instance.
Enabled Debug Modes
List of debug modes that are enabled for the EPSR instance.
Possible modes are: INFO, MSG, PKT and STATE. If a no debugging
modes are enabled, the displayed output is None.
Output
Output device for the EPSR instance. This is only shown when a
debug mode is enabled.
Timeout
Time in seconds that the EPSR instance stays in debug mode. This
is only shown when a debug mode is enabled. If no timeout value
has been set, the displayed output is None.
The timeout parameter is set using the
enable epsr debug
command on page 1-24
