58
Internet Group Management Protocol (IGMP) Enhancements
Release Note
Software Version 2.8.1
C613-10477-00 REV B
Finally, apply the filter to a switch port, using the command:
set switch port={
port-list
|all} igmpfilter=
filter-id
[
other-options...
]
You can apply an IGMP filter to more than one switch port, but a single switch
port can have only one IGMP filter assigned to it.
To delete or modify an entry in a filter, use the commands:
delete igmp filter=
filter-id
entry=1..65535
set igmp filter=
filter-id
entry=1..65535
[groupaddress={
ipadd
|
ipadd
-
ipadd
}]
[msgtype={query|report|leave}] [action={include|exclude}]
To remove a filter from a switch port, use the command:
set switch port={
port-list
|all} igmpfilter=none
[
other-options...
]
To destroy a filter, first remove the filter from all ports that it is applied to, then
use the command:
destroy igmp filter=
filter-id
To display information about IGMP filters, use the command:
show igmp filter=
filter-id
To display the IGMP filter assigned to a switch port, use the command:
show switch port[={
port-list
|all}]
Command Changes
The following table summarises the modified commands:
Command
Change
add igmp filter
New
msgtype
parameter
set igmp filter
New
msgtype
parameter
show igmp filter
New fields
Msg Type
,
Reports
,
Queries
, and
Leaves
.
