NOTE: The window display will flash. Press STOP/
RESET twice (within three seconds) to end the cycle
and reset the control to idle status. To restart the
tumble dryer, CLOSE door and press START pad.
IMPORTANT: If the loading door or lint panel door is
opened during the cycle, the heating system will
shut off and the motor will stop. To restart the cycle,
both doors must be closed and START pad must be
pressed.
4.
When the cycle is complete, open door and remove the laun-
dry.
WARNING
To prevent the risk of fire, remove laundry imme-
diately in case of power failure.
W779
NOTE: This machine includes an anti-wrinkle/ ex-
tended tumble feature. After the drying cycle is
complete, the cylinder will tumble without heat ev-
ery few minutes. The intermittent tumbling will con-
tinue for one hour or until the door is opened.
LED OPL Control
RE Control Suffix
1.
Press the Up or Down keypad to change cycles.
To customize a cycle, refer to the Programming Manual.
2.
Press START
(
)
to start selected cycle.
IMPORTANT: If the loading door or lint panel door is
opened during the cycle, the heating system will
shut off and the motor will stop. To restart the cycle,
both doors must be closed and the START
(
)
pad must be pressed.
3.
When the cycle is complete, open door and remove laundry.
WARNING
To prevent the risk of fire, remove laundry imme-
diately in case of power failure.
W779
NOTE: This machine includes an anti-wrinkle/
extended tumble feature. After the drying cycle is
complete, the cylinder will tumble without heat ev-
ery few minutes. The intermittent tumbling will con-
tinue for one hour or until the door is opened. After
an hour the machine enters delayed tumble and will
tumble for two minutes every hour for up to 18
hours or until the door is opened.
S Models
TMB1345R_SVG
H Models
TMB1346R_SVG
Figure 34
Operating Instructions
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
68
Part No. 70458101ENR10
Summary of Contents for XT170L
Page 2: ......